EVB User Guide V1.0
Table Of Contents
- Safety Information
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 General Overview
- 3 Interface Application
- 3.1. Power Supply (J0202/J0601)
- 3.2. Switches, Button and Status Indicators
- 3.3. M.2 Interface (J0101)
- 3.4. USB Type-C Interface (J0601)
- 3.5. USB-TO-UART Interface (J0901/J0902)
- 3.6. (U)SIM Interfaces (J0701/J0702)
- 3.7. Audio Interfaces (J0801/J0802/J0803)
- 3.8 PCIe Interface to WLAN/Ethernet Module (J0501/J0502)
- 3.9. Antenna Interfaces
- 3.10. Test Points
- 4 Operation Procedures
- 5 Appendix References
5G Module Series
5G-M2_EVB_User_Guide 8 / 34
1 Introduction
This document describes how to use the 5G-M2 EVB, which is an assistant tool for engineers to develop
and test Quectel’s RM500Q series, RM502Q series, and RM505Q-AE modules.
1.1. Special Mark
Table 1: Special Mark
Mark
Definition
*
Unless otherwise specified, when an asterisk (*) is used after a function, feature, interface, pin
name, AT command, or argument, it indicates that the function, feature, interface, pin, AT
command, or argument is under development and currently not supported; and the asterisk (*)
after a model indicates that the sample of such model is currently unavailable.