EVB User Guide V1.0
Table Of Contents
- Safety Information
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 General Overview
- 3 Interface Application
- 3.1. Power Supply (J0202/J0601)
- 3.2. Switches, Button and Status Indicators
- 3.3. M.2 Interface (J0101)
- 3.4. USB Type-C Interface (J0601)
- 3.5. USB-TO-UART Interface (J0901/J0902)
- 3.6. (U)SIM Interfaces (J0701/J0702)
- 3.7. Audio Interfaces (J0801/J0802/J0803)
- 3.8 PCIe Interface to WLAN/Ethernet Module (J0501/J0502)
- 3.9. Antenna Interfaces
- 3.10. Test Points
- 4 Operation Procedures
- 5 Appendix References
5G Module Series
5G-M2_EVB_User_Guide 27 / 34
J1103.6
RFFE_VIO_1V8
M.2 module Pin 65, a 1.8 V power output usually*
J1103.7
FULL_CARD_POW
ER_OFF#
M.2 module Pin 6, used to turn on/off the module
J1103.8
GPS_PPS
M.2 module Pin 56, depend on the pin function of module
J1103.9
W_DISABLE2#
M.2 module Pin 26, GNSS disable control signal
J1103.10
W_DISABLE1#
M.2 module Pin 8, airplane mode control signal
J1102
-
-
Quectel internal use only
J1106
-
-
Quectel internal use only
J1107
-
-
Quectel internal use only
J1108
-
-
Quectel internal use only
J1109
-
-
Quectel internal use only