User Guide
Table Of Contents
- 1. Scope
- 2. LMU-3040 Hardware Specifications
- 3. LMU-3040™ Connectors
- 4. Getting Started
- 4.2 SSH Credentials
- 4.3 Interactive “AT Console”
- 4.4 Command Line Interface (CLI)
- 4.5 Log File
- 4.6 Backup Logs
- 4.7 File Components
- 4.8 Software & Script Updates
- 5. PEG2
- 5.2 PEG2 File
- 5.3 PEG2 TAG Definitions
- 5.4 Multiple Modifiers
- 5.5 PEG1 -> PEG2 Conversion
- 5.6 PEG2 Native Editor
- 6. LMU32 vs EdgeCore Platform Differences
- 6.1 I/O Mapping & Wake-Up Sources
- 6.2 LMU Firmware Updates (Delta Files)
- 6.3 Vehicle Bus PID Polling Rate
- 6.4 PEG2 “Lines”
- 6.5 Event Index Field
- 6.6 Remote Debug PEG Action
- 6.7 Modem/GPS Reset
- 6.8 SIM Form Factor
- 6.9 Boot Reason
- 6.10 Peg Resources
- 6.11 GPS
- 6.12 Motion Logs (4hz vs 5hz GPS Sample Rate)
- 6.13 Time Sync Precedence
- 6.14 Version String in ID Reports
- 6.15 Firmware Revision Convention
- 6.16 Status LEDs
- 6.17 Dual APN Mode
- 6.18 Version Reports (App Message 111)
- 7. Installation Verification
- 8. Regulatory Information
COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein. Page
Reproduction use or disclosure to third parties without express permission is strictly prohibited. ©2021 CalAmp 9 of 40
LMU-3x40 Training Guide
Revision & Date
1.6 – 03/24/2021
PULS™: Monitor, manage, upgrade firmware, configure and troubleshoot devices
remotely
Embedded Intelligence Engine
PEGII™: Update device functionality or develop new on the edge applications
Geo-Fences: 32 built-in
Buffered Messages: 20,000
Electrical
Operating Voltage: 12-24 VDC Vehicle Systems
9-30 VDC (start-up, operating)
7-32 VDC (momentary)
Power Consumption: Typical 500 uA @ 12V (deep sleep)
Typical 2 mA @ 12V (sleep on active network)
Typical 70 mA @ 12V (active tracking with GPS and cell enabled)
Battery
Battery Capacity: 180 mAH
Battery Technology: Lithium-Ion
Charging Temperature: 0° to +45° C
Certifications: IEEE 1725-2011, UL 1624, UN 38.3
Environmental:
Temperature: -30° to +60° C (connected to primary power)
-10° to +60° C (operating on internal battery)
-20° to +25° C ≤ 6 months (long term storage)
Humidity: 95% RH @ 50° C non-condensing
Shock and Vibration: U.S. Military Standards 202G, 810F SAEJ1455
ESD: IEC 61000-4-2 (4KV Test)
Physical/Design
Dimensions: 1.88 x 2.50 x 1.14” (48 x 63.25 x 29 mm)
Weight: 2.54 oz. (72 g)