Installation Guide

Active Standby < 70mA at 12VDC
Radio Active Sleep < <TBD> at 12VDC
Deep Sleep < 2mA at 12VDC
GPS
50 channel WAAS capable GPS Receiver
2.5m CEP (with SA off)
-162 dBm tracking sensitivity
Communications (Comm)
Data Support
LTE CAT M1
LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28
EGPRS: 850/900/1800/1900 MHz
3GPP release 13
BLE: 4.0
RoHS Compliant
3.2 Primary Connector
The TTU-2830™ uses 8 22AWG leads for its power and I/O connections. These leads
are mapped as follows:
Wire
Signal
Name
Description
Color
Input or
Output
1
GND
Ground
Black
Ground
2
V
CC
Primary Power
Red
Input
3
IN-0
Input 0 – Ignition
White
Input
4
IN-1
Input 1 – Digital Input
Blue
Input
5
IN-2
Input 2 – Digital Input
Orange
Input
6
OUT-0
Ouput 0 – Starter Disable
Relay Driver
Green
Ouput
7
OUT-1
Ouput 1 – Digital Output
Brown
Ouput
8
OUT-2
Ouput 2 – Digital Output
Yellow
Ouput
9
SER_OUT
Serial Output
Green\Black
Output
10
SER_IN
Serial Input
Blue\Black
Input