Product Info

Smart Module Series
SC200R Series Hardware Design
SC200R_Series_Hardware_Design 18 / 125
1.
1)
SC200R-WF does not support GNSS.
2.
2)
Within the operating temperature range, the module is 3GPP compliant.
USB Interface
Compliant with USB 2.0 specification
Supports up to 480 Mbps
Supports USB OTG
Used for AT command communication, data transmission, software debugging
and firmware upgrade
UART Interfaces
Three UART interfaces: UART5, UART2 (debug UART) and UART1, baud
rate up to 4 Mbps
 UART5: 4-wire UART interface, hardware flow control supported
 UART2 (debug UART): 2-wire UART interface, used for debugging by
default
 UART1: 2-wire UART interface
SD Card Interface
Supports SD 3.0
Supports SD card hot-plug
(U)SIM Interfaces
Two (U)SIM interfaces
Supports USIM/SIM card: 1.8 V or 2.95 V
Supports Dual SIM Dual Standby (supported by default)
I2C Interfaces
Four I2C interfaces
Used for peripherals such as camera, sensor, touch panel, etc.
ADC Interfaces One generic ADC interface up to 15-bit resolution
Real Time Clock Supported
Antenna Interfaces Main antenna, Rx-diversity antenna, GNSS
1)
antenna and Wi-Fi/BT antenna
Physical
Characteristics
Size: (40.5 ±0.15) mm × (40.5 ±0.15) mm × (2.8 ±0.2) mm
Package: LCC + LGA
Weight: Approx. 10.2 g
Temperature Range
Operating temperature range: -35 °C to +75 °C
2)
Storage temperature range: -40 °C to +90 °C
Firmware Upgrade Over USB interface
RoHS All hardware components are fully compliant with EU RoHS directive
NOTES