Service Guide
Table Of Contents
- Safety Information
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Overview
- 3 Operating Characteristics
- 4 Application Interfaces
- 5 Antenna Interfaces
- 6 Electrical Characteristics and Reliability
- 7 Mechanical Information and Packaging
LTE-A Module Series
EM060K-GL&EM120K-GL_Hardware_Design 20 / 78
2.5. Pin Description
Table 4: Definition of I/O Parameters
Table 5: Pin Description
Type Description
AI Analog Input
AO Analog Output
AIO Analog Input/Output
DI Digital Input
DO Digital Output
DIO Digital Input/Output
OD Open Drain
PI Power Input
PO Power Output
PU Pull Up
PD Pull Down
Pin No. Pin Name I/O Description
DC
Characteristic
Comment
1 CONFIG_3 DO
Not connected
internally
2 VCC PI Power supply
Vmin = 3.135 V
Vnom = 3.7 V
Vmax = 4.4 V
3 GND Ground
4 VCC PI Power supply
Vmin = 3.135 V
Vnom = 3.7 V
Vmax = 4.4 V
5 GND Ground