Service Guide

LTE-A Module Series
EM060K-GL&EM120K-GL_Hardware_Design 16 / 78
 Smart Metering System
 Wireless Router and Switch
 Other Wireless Terminal Devices
2.2. Key Features
Table 3: Key Features
Feature Details
Function Interface PCI Express M.2 Interface
Power Supply

Supply voltage: 3.135–4.4 V
 Typical supply voltage: 3.7 V
(U)SIM Interface
 Compliant with ISO/IEC 7816-3 and ETSI and IMT-2000 requirements
 Supports (U)SIM card: 1.8/3.0 V

Supports Dual SIM Single Standby
eSIM eSIM function is optional
USB Interface

Compliant with USB 3.0 and 2.0 specifications, with maximum transmission
rates up to 5 Gbps on USB 3.0 and 480 Mbps on USB 2.0.
 Used for AT command communication, data transmission, firmware
upgrade (USB 2.0 only), software debugging, GNSS NMEA sentence
output, and voice over USB*.
 Supports USB serial drivers:
- Windows 7/8/8.1/10/11;
- Linux 2.6- 5.15
-
Android 4.x-12.x
PCM Interface*
 Used for audio function with external codec
 Supports 16-bit linear data format
 Supports long and short frame synchronization
 Supports master and slave modes, but must be the master in long frame
synchronization
Rx-diversity LTE/WCDMA
Antenna Interfaces

Main, Diversity and GNSS antenna connectors
 50 Ω impedance
Transmitting Power
 WCDMA: Class 3 (23 dBm ±2 dB)
 LTE-FDD/TDD: Class 3 (23 dBm ±2 dB)
LTE Features
EM060K-GL
 Supports 3GPP Rel-12 LTE-FDD and LTE-TDD
 Supports 1.4/3/5/10/15/20 MHz RF bandwidth