Service Guide
Table Of Contents
- Safety Information
- About the Document
- Contents
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Overview
- 3 Application Interfaces
- 3.1. General Description
- 3.2. Pin Assignment
- 3.3. Pin Description
- 3.4. Operating Modes
- 3.5. Power Saving
- 3.6. Power Supply
- 3.7. Turn on/Turn off/Reset
- 3.8. (U)SIM Interfaces
- 3.9. USB Interface
- 3.10. UART Interfaces
- 3.11. SPI Interface
- 3.12. I2C Interfaces
- 3.13. PCM Interface
- 3.14. Analog Audio Interfaces
- 3.15. LCD Interface
- 3.16. Matrix Keyboard Interface
- 3.17. SD Card Interface
- 3.18. WLAN Application Interface*
- 3.19. ADC Interfaces
- 3.20. Network Status Indication
- 3.21. STATUS
- 3.22. Behaviors of MAIN_RI
- 3.23. USB_BOOT Interface
- 4 Antenna Interfaces
- 5 Electrical Characteristics, Radio and Reliability
- 6 Mechanical Information
- 7 Storage, Manufacturing & Packaging
- 8 Appendix References
LTE Standard Module Series
EC200U_Series_Hardware_Design 10 / 94
Table 4: Frequency Bands of EC200U-AU Module
With a compact profile of 28.0 mm × 31.0 mm × 2.4 mm, EC200U series can meet almost all
requirements for M2M applications such as automotive, metering, tracking system, security, router,
wireless POS, mobile computing device, PDA phone, tablet PC, etc.
EC200U series is an SMD type module which can be embedded into applications through 144 pins,
including 80 LCC pins and 64 LGA pins.
2.2. Key Features
Table 5: Key Features of EC200U Series Module
GNSS
2
GPS, GLONASS, BeiDou, Galileo, QZSS
Bluetooth and Wi-Fi Scan
3
Support
Network Mode
Frequency Band
LTE-FDD
B1/B2/B3/B4/B5/B7/B8/B28/B66
LTE-TDD
B38/B40/B41
GSM
1
GSM850/GSM900/DCS1800/PCS1900
GNSS
2
GPS, GLONASS, BeiDou, Galileo, QZSS
Bluetooth and Wi-Fi Scan
3
Support
Feature
Details
Power Supply
⚫ Supply voltage: 3.3–4.3 V
⚫ Typical supply voltage: 3.8 V
Transmitting Power
⚫ Class 4 for EGSM850
⚫ Class 4 for EGSM900
⚫ Class 1 for DCS1800
⚫ Class 1 for PCS1900
⚫ Class 3 for LTE-FDD bands
⚫ Class 3 for LTE-TDD bands
LTE Features
⚫ Supports Cat 1 FDD and TDD
⚫ Supports 1.4/3/5/10/15/20 MHz RF bandwidth