Product Info

SC200L Hardware Design
SC200L_Hardware_Design 77 / 103
NOTE
“*” means under development.
7.7 Electrostatic Discharge
The module is not protected against electrostatic discharge (ESD) in general. Consequently, it should be
subject to ESD handling precautions that are typically applied to ESD sensitive components. Proper ESD
handling and packaging procedures must be applied throughout the processing, handling and operation
of any application that incorporates the module.
The following table shows the electrostatic discharge characteristics of SC200L module.
Table 11: ESD Characteristics ( Temperature: 25 ºC, Humidity: 45%)
LTE-TDD B40 (10 MHz) -97.4 -98.9 -100.9 -96.3 dBm
LTE-TDD B41 (10 MHz) -96.2 -97.5 -100.2 -94.3 dBm
Tested Points Contact Discharge Air Discharge Unit
VBAT, GND +/-5 +/-10 KV
All Antenna Interfaces +/-5 +/-10 KV
Other Interfaces +/-0.5 +/-1 KV