Product Info

5G Module Series
RM502Q-GL Hardware Design
RM502Q-GL_Hardware_Design 41 / 77
“*” means under development.
3.10.1. W_DISABLE1#*
RM502Q-GL provides a W_DISABLE1# pin to disable or enable airplane mode through hardware
operation. The W_DISABLE1# pin is pulled up by default. Driving it low will set the module to airplane
mode. In airplane mode, the RF function will be disabled.
The RF function can also be enabled or disabled through software AT commands. The following table
shows the RF function status of the module.
Table 13: RF Function Status
3.10.2. W_DISABLE2#*
RM502Q-GL provides a W_DISABLE2# pin to disable or enable the GNSS function. The W_DISABLE2#
pin is pulled up by default. Driving it low will disable the GNSS function. The combination of
W_DISABLE2# pin and AT commands can control the GNSS function.
68
AP2SDX_STATUS
DI
Status indication from AP
1.8 V power
domain
W_DISABLE1# Level
AT Commands
RF Function Status
High Level
AT+CFUN=1
Enabled
High Level
AT+CFUN=0
AT+CFUN=4
Disabled
Low Level
AT+CFUN=0
AT+CFUN=1
AT+CFUN=4
Disabled
NOTE