Service Guide

LTE Standard Module Series

EG91_Series_Hardware_Design

/ 105

Table 49: EG91-NAXDL Conducted RF Receiving Sensitivity

Table 50: EG91-VX Conducted RF Receiving Sensitivity

6.7. Electrostatic Discharge

The module is not protected against electrostatic discharge (ESD) in general. Consequently, it is subject

to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and

packaging procedures must be applied throughout the processing, handling and operation of any

application that incorporates the module.

The following table shows the module’s electrostatic discharge characteristics.

LTE-FDD B25 (10 MHz) -97.6 dBm -99 dBm -102.2 dBm -92.8 dBm

LTE-FDD B26 (10 MHz) -99.1 dBm -99.9 dBm -102.7 dBm -93.8 dBm

Frequency Band

Receiving Sensitivity (Typ.)

3GPP (SIMO)

Primary Diversity SIMO

LTE-FDD B2 (10 MHz) -98 dBm -99 dBm -102.2 dBm -94.3 dBm

LTE-FDD B4 (10 MHz) -97.8 dBm -99.5 dBm -102.2 dBm -96.3 dBm

LTE-FDD B5 (10 MHz) -99.4 dBm -100 dBm -102.7 dBm -94.3 dBm

LTE-FDD B12 (10 MHz) -99.5 dBm -100 dBm -102.5 dBm -93.3 dBm

LTE-FDD B13 (10 MHz) -99.2 dBm -100 dBm -102.5 dBm -93.3 dBm