Service Guide

LTE Standard Module Series

EG91_Series_Hardware_Design

/ 105

In GPRS 4 slots TX mode, the maximum output power is reduced by 3.0 dB. The design conforms to the

GSM specification as described in Chapter 13.16 of 3GPP TS 51.010-1.

6.6. RF Receiving Sensitivity

The following tables show the conducted RF receiving sensitivity of EG91 series module.

Table 42: EG91-AUX Conducted RF Receiving Sensitivity

Frequency Band Primary Diversity SIMO 3GPP

GSM850 -109.1 dBm - - -102 dBm

EGSM900 -109.7 dBm - - -102 dBm

DCS1800 -110.0 dBm - - -102 dBm

PCS1900 -109.4 dBm - - -102 dBm

WCDMA B1 -109.2 dBm - - -106.7 dBm

WCDMA B2 -109.8 dBm - - -104.7 dBm

WCDMA B5 -110 dBm - - -104.7 dBm

WCDMA B8 -110 dBm - - -103.7 dBm

LTE-FDD B1 (10 MHz) -97.2 dBm - - -96.3 dBm

LTE-FDD B2 (10 MHz) -97.7 dBm - - -94.3 dBm

LTE-FDD B3 (10 MHz) -98.2 dBm - - -93.3 dBm

LTE-FDD B4 (10 MHz) -97.7 dBm - - -96.3 dBm

LTE-FDD B5 (10 MHz) -99.2 dBm - - -94.3 dBm

LTE-FDD B7 (10 MHz) -96.7 dBm - - -94.3 dBm

LTE-FDD B8 (10 MHz) -98.0 dBm - - -93.3 dBm

LTE-FDD B28 (10 MHz) -98.7 dBm - - -94.8 dBm

LTE-FDD B66 (10 MHz) -97.7 dBm - - -95.8 dBm