Product Info

LTE Standard Module Series
EC25 Series Hardware Design
EC25_Series_Hardware_Design 64 / 134
The following table describes the characteristic of ADC function.
Table 18: Characteristic of ADC
1. ADC input voltage must not exceed that of VBAT_BB.
2. It is prohibited to supply any voltage to ADC pins when VBAT power supply is removed.
3. It is recommended to use a resistor divider circuit for ADC application.
3.16. SGMII Interface
EC25 includes an integrated Ethernet MAC with an SGMII interface and two management interfaces. The
key features of the SGMII interface are shown below:
⚫ IEEE802.3 compliant
⚫ Support 10 Mbps/100 Mbps/1000 Mbps Ethernet work mode
⚫ Support maximum 150 Mbps (DL)/50 Mbps (UL) for 4G network
⚫ Support VLAN tagging
⚫ Support IEEE1588 and Precision Time Protocol (PTP)
⚫ Can be used to connect to external Ethernet PHY like AR8033, or to an external switch
⚫ Management interfaces support dual voltage 1.8/2.85 V
The following table shows the pin definition of SGMII interface.
Table 19: Pin Definition of SGMII Interface
ADC1
44
General-purpose analog to digital converter
Parameter
Min.
Typ.
Max.
Unit
ADC0 Voltage Range
0.3
VBAT_BB
V
ADC1 Voltage Range
0.3
VBAT_BB
V
ADC Resolution
15
bits
Pin Name
Pin No.
I/O
Description
Comment
Control Signal Part
NOTES