Product Info

LTE Standard Module Series
EC25 Mini PCIe Hardware Design
EC25_Mini_PCIe_Hardware_Design
27
/ 80
Figure 3: Reference Circuit of Power Supply
3.6. (U)SIM Interface
EC25 Mini PCIe’s (U)SIM interface circuitry meets ETSI and IMT-2000 requirements. Both 1.8V and 3.0V
(U)SIM cards are supported. The following table shows the pin definition of (U)SIM interface.
Table 7: Pin Definition of (U)SIM Interface
EC25 Mini PCIe supports (U)SIM card hot-plug via the USIM_PRESENCE pin. The function supports low
level and high level detections. By default, It is disabled, and can be configured via AT+QSIMDET
command. Please refer to document [2] for details about the command.
The following figure shows a reference design for (U)SIM interface with an 8-pin (U)SIM card connector.
Pin Name Pin No. I/O Power Domain Description
USIM_VDD 8 PO 1.8V/3.0V Power supply for (U)SIM card
USIM_DATA 10 IO 1.8V/3.0V Data signal of (U)SIM card
USIM_CLK 12 DO 1.8V/3.0V Clock signal of (U)SIM card
USIM_RST 14 DO 1.8V/3.0V Reset signal of (U)SIM card
USIM_PRESENCE 44 DI 1.8V (U)SIM card insertion detection