Product Info

Antenna
(1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
(2) The transmitter module may not be co-located with any other transmitter or antenna.
In the event that these conditions cannot be met (for example certain laptop configurations or co-location
with another transmitter), then the FCC/IC authorization is no longer considered valid and the FCC ID/IC
ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible
for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC
authorization.
To comply with FCC regulations limiting both maximum RF output power and human exposure to RF
radiation, maximum antenna gain (including cable loss) must not exceed
Test Mode Antenna Gain (dBi) Test Mode Antenna Gain (dBi)
NB-IoT Band 2 8.00
NB-IoT Band 4* 8.00
NB
-IoT Band
17
5.00
NB-IoT Band 5 5.00
NB
-IoT Band 25 8.00
NB-IoT Band 12 5.00
NB
-IoT Band 66
*
8.00
NB-IoT Band 13 5.00
NB
-
IoT Band 85 5.00
Note: “*” means when using these max gain antenna, the host manufacturer should reduce the
conducted power to meet the FCC maximum RF output power limit.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install
or remove this RF module in the user’s manual of the end product which integrates this module. The end
user manual shall include all required regulatory information/warning as show in this manual