Product Info

LTE Standard Module Series
EG95 Series Hardware Design
EG95_Series_Hardware_Design
81 / 99
6.5. RF Output Power
The following table shows the RF output power of EG95 module.
Table 38: RF Output Power
Frequency Max. Min.
GSM850/EGSM900 33 dBm ±2 dB 5 dBm ±5 dB
DCS1800/PCS1900 30 dBm ±2 dB 0 dBm ±5 dB
GSM850/EGSM900 (8-PSK) 27 dBm ±3 dB 5 dBm ±5 dB
DCS1800/PCS1900 (8-PSK) 26 dBm ±3 dB 0 dBm ±5 dB
WCDMA B1/B2/B4/B5/B8 24 dBm +1/ -3 dB < -49 dBm
LTE-FDD B1/B2/B3/B4/B5/B7/
B8/B12/B13/B20/B25/B26/B28/B66
23 dBm ±2 dB < -39 dBm
NOTE
In GPRS 4 slots TX mode, the maximum output power is reduced by 3.0dB. The design conforms to the
GSM specification as described in Chapter 13.16 of 3GPP TS 51.010-1.
6.6. RF Receiving Sensitivity
The following tables show the conducted RF receiving sensitivity of EG95 module.
Table 39: EG95-E Conducted RF Receiving Sensitivity
Frequency
Primary
Diversity
SIMO
3GPP
EGSM900
-108.6 dBm
NA
NA
-102 dBm
DCS1800
-109.4 dBm
NA
NA
-102 dBm
WCDMA B1
-109.5 dBm
-110 dBm
-112.5 dBm
-106.7 dBm
WCDMA B8
-109.5 dBm
-110 dBm
-112.5 dBm
-103.7 dBm