Product Info

LTE Standard Module Series
EG95 Series Hardware Design
EG95_Series_Hardware_Design
4 / 99
21. Added description of USB_BOOT interface
in Chapter 3.18.
22. Updated description of manufacturing and
soldering in Chapter 8.2.
1.4
2019-07-05
Ward WANG
1. Updated supported protocols (Table 2).
2. Updated timing of turning on module (Figure
12).
3. DFOTA is developed.
4. Updated description of USB_BOOT interface
and timing sequence for entering emergency
download mode (Chapter 3.18 and Figure
29).
1.5
2019-08-09
Fanny CHEN/
Rex WANG
1. Added ThreadX module EG95-NAX and
updated related contents (Table 1 and 4,
Chapter 2.2, 2.3, 3.2 and 5).
2. Updated module operating frequencies
(Table 25).
3. Updated antenna requirements (Table 28).
4. Added current consumption of EG95-NAX
(Table 35).
5. Updated RF output power (Table 37).
6. Updated EG95-NA conducted RF receiving
sensitivity (Table 39).
7. Added EG95-NAX conducted RF receiving
sensitivity (Table 41).
1.6
2019-11-07
Ward WANG
1. Removed related information of ThreadX OS.
2. Updated the supported USB serial drivers
(Table 2)
3. Updated the notes for GNSS performance
(Chapter 4.2).
4. Updated the AT command be used to disable
the receive diversity (Chapter 5.1.3).
1.7
2020-04-15
Ward WANG
1. Updated description of airplane mode
(Chapter 3.5.2).
2. Updated the functions of main UART
interface (Chapter 3.11).
3. Added the note about the standard that the
package warpage level of the module
conforms to (Chapter 7.1).
4. Updated module storage information
(Chapter 8.1).
5. Updated module manufacturing and
soldering information (Chapter 8.2).