Product Info

LTE Standard Module Series
EG95 Series Hardware Design
EG95_Series_Hardware_Design
31 / 99
Mode
Details
Normal
Idle
Software is active. The module has registered on the network, and it is
ready to send and receive data.
Talk/Data
decided by network setting and data transfer rate.
Minimum
Functionality
Mode
AT+CFUN=0 command can set the module to a minimum functionality mode without
removing the power supply. In this case, both RF function and (U)SIM card will be invalid.
Airplane
Mode
AT+CFUN=4 command or W_DISABLE# pin can set the module to enter airplane mode.
In this case, RF function will be invalid.
Sleep Mode
In this mode, the current consumption of the module will be reduced to the minimal level.
USB_BOOT
75
DI
Force the module
to enter emergency
download mode
V
IL
min = -0.3 V
V
IL
max = 0.6 V
V
IH
min = 1.2 V
V
IH
max = 2.0 V
1.8 V power domain.
It is recommended to
reserve the test
points.
RESERVED Pins
Pin Name
Pin No.
I/O
Description
DC Characteristics
Comment
NC
1,2, 11–14,
16, 51,
57, 63–66,
76–78,
88, 92–99
NC
Keep these pins
unconnected.
RESERVED
18, 25, 56
Reserved
Keep these pins
unconnected.
Pin 56 is only
reserved on EG95-E.
NOTE
Keep all RESERVED pins and unused pins unconnected.
3.4. Operating Modes
The following table briefly outlines the operating modes to be mentioned in the following chapters.
Table 5: Overview of Operating Modes
Operation
Network connection is ongoing. In this mode, the power consumption is