Product Info

LTE Standard Module Series
EG95 Series Hardware Design
EG95_Series_Hardware_Design
18 / 99
Support GPRS multi-slot class 33 (33 by default)
Coding scheme: CS-1, CS-2, CS-3 and CS-4
Max 107 kbps (DL), Max 85.6 kbps (UL)
EDGE:
Support EDGE multi-slot class 33 (33 by default)
Support GMSK and 8-PSK for different MCS (Modulation and Coding
Scheme)
Downlink coding schemes: MCS 1-9
Uplink coding schemes: MCS 1-9
Max 296 kbps (DL)/Max 236.8 kbps (UL)
Internet Protocol Features
Support TCP/UDP/PPP/FTP/FTPS/HTTP/HTTPS/NTP/PING/QMI/NITZ/
SMTP/SSL/MQTT/CMUX/SMTPS/MMS*/FILE* protocols
Support PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol) protocols which are usually used for
PPP connections
SMS
Text and PDU modes
Point-to-point MO and MT
SMS cell broadcast
SMS storage: ME by default
(U)SIM Interfaces
Support 1.8 V and 3.0 V (U)SIM cards
Audio Features
Support one digital audio interface: PCM interface
GSM: HR/FR/EFR/AMR/AMR-WB
WCDMA: AMR/AMR-WB
LTE: AMR/AMR-WB
Support echo cancellation and noise suppression
PCM Interface
Used for audio function with external codec
Support 16-bit linear data format
Support long frame synchronization and short frame synchronization
Support master and slave modes, but must be the master in long frame
synchronization
USB Interface
Compliant with USB 2.0 specification (slave only); the data transfer rate can
reach up to 480 Mbps
Used for AT command communication, data transmission, GNSS NMEA
sentences output, software debugging, firmware upgrade and voice over
USB
Support USB serial drivers for: Windows 7/8/8.1/10, Linux 2.6–5.4, Android
4.x/5.x/6.x/7.x/8.x/9.x, etc.
UART Interface
Main UART:
Used for AT command communication and data transmission
Baud rates reach up to 921600 bps, 115200 bps by default
Support RTS and CTS hardware flow control
Debug UART:
Used for Linux console and log output