Product Info
LTE Standard Module Series
EG91 Series Hardware Design
EG91_Series_Hardware_Design
49 / 102
MCU/ARM
TXD
RXD
VDD_EXT
4.7K
VDD_EXT
10K
Module
RXD
TXD
RTS
CTS
GPIO
EINT
10K
VCC_MCU
4.7K
VDD_EXT
RTS
CTS
DTR
RI
GPIO DCD
GND
GND
Figure 21: Reference Circuit with Transistor Circuit
NOTE
Transistor circuit solution is not suitable for applications with high baud rates exceeding 460Kbps.
3.12.
PCM and I2C Interfaces
EG91 series module provides one Pulse Code Modulation (PCM) digital interface for audio design, which
supports the following modes and one I2C interface:
•
Primary mode (short frame synchronization, works as both master and slave)
•
Auxiliary mode (long frame synchronization, works as master only)
In primary mode, the data is sampled on the falling edge of the PCM_CLK and transmitted on the rising
edge. The PCM_SYNC falling edge represents the MSB. In this mode, the PCM interface supports
256KHz, 512KHz, 1024KHz or 2048KHz PCM_CLK at 8KHz PCM_SYNC, and also supports 4096KHz
PCM_CLK at 16KHz PCM_SYNC.
In auxiliary mode, the data is also sampled on the falling edge of the PCM_CLK and transmitted on the
rising edge. The PCM_SYNC rising edge represents the MSB. In this mode, the PCM interface operates
with a 256KHz, 512KHz, 1024KHz or 2048KHz PCM_CLK and an 8KHz, 50% duty cycle PCM_SYNC.
EG91 series module supports 16-bit linear data format. The following figures show the primary mode’s
timing relationship with 8KHz PCM_SYNC and 2048KHz PCM_CLK, as well as the auxiliary mode’s
timing relationship with 8KHz PCM_SYNC and 256KHz PCM_CLK.