Product Info

LPWA Module Series
BG95 Series Hardware Design
BG95_Series_Hardware_Design 50 / 106
Table 14: Pin Definition of Debug UART Interface
Table 15: Pin Definition of GNSS UART Interface
GNSS_TXD is a BOOT_CONFIG pin. Never pull it up before startup, otherwise the module cannot power
on normally.
The logic levels of UART interfaces are described in the following table.
Table 16: Logic Levels of Digital I/O
The module provides 1.8 V UART interfaces. A voltage-level translator should be used if customers’
application is equipped with a 3.3 V UART interface. The voltage-level translator TXS0108EPWR
provided by Texas Instruments is recommended. The following figure shows a reference design of the
main UART interface.
Pin Name Pin No. I/O Description Comment
DBG_RXD 22 DI Debug UART receive 1.8 V power domain
DBG_TXD 23 DO Debug UART transmit 1.8 V power domain
Pin Name Pin No. I/O Description Comment
GNSS_TXD 27 DO GNSS UART transmit
BOOT_CONFIG.
Do not pull it up before startup.
1.8 V power domain
GNSS_RXD 28 DI GNSS UART receive 1.8 V power domain
Parameter Min. Max. Unit
V
IL
-0.3 0.6 V
V
IH
1.2 2.0 V
V
OL
0 0.45 V
V
OH
1.35 1.8 V
NOTE