Product Info

LPWA Module Series
BG600L-M3 Hardware Design
BG600L-M3_Hardware_Design 69 / 83
1.
1)
The current consumption in PSM is much lower than that in power off mode, and this is because of
the following two designs:
 More internal power supplies are powered off in PSM.
 Also the internal clock frequency is reduced in PSM.
2.
2)
The module’s USB and UART are disconnected and GSM network does not support PSM.
Table 39: GNSS Current Consumption
Description Conditions Typ. Unit
Searching
(AT+CFUN=0)
Cold start @ Instrument TBD mA
Cold start @ Real network with half sky, Active Antenna TBD mA
Tracking
(AT+CFUN=0)
Instrument Environment @ DPO off TBD mA
Instrument Environment @ DPO on TBD mA
Half Sky @ Real network, Active Antenna, DPO off TBD mA
5.5 RF Output Power
The following table shows the RF output power of BG600L-M3.
Table 40: BG600L-M3 RF Output Power
Frequency Max. Min.
LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14
1)
/
B18/B19/B20/B25/B26/B27
1)
/B28/B66/B71
2)
/B85
21 dBm +1.7/-3 dB <-39 dBm
GSM850/EGSM900 33 dBm ±2 dB 5 dBm ±5 dB
DCS1800/PCS1900 30 dBm ±2 dB 0 dBm ±5 dB
GSM850/EGSM900 (8-PSK) 27 dBm ±3 dB 5 dBm ±5 dB
DCS1800/PCS1900 (8-PSK) 26 dBm ±3 dB 0 dBm ±5 dB
NOTES