Product Info

Smart Module Series
SC600Y&SC600T Hardware Design
SC600Y&SC600T_Hardware_Design 106 / 134
all the right-angle traces should be changed to curved ones.
 There should be clearance under the signal pin of the antenna connector or solder joint.
 The reference ground of RF traces should be complete. Meanwhile, adding
some ground vias around RF traces and the reference ground could help to
improve RF performance. The distance between the ground vias and RF
traces should be no less than two times as wide as RF signal traces (2 W).
带格式的: 列表段落,列出
段落, 缩进: 左侧: 2.49 厘
米, 右侧: 1.51 厘米, 段
落间距段前: 3.55 磅, 行距:
多倍行距 1.29 字行, 不调整
西文与中文之间的空格, 不
调整中文和数字之间的空格,
制表位: 3.62 字符, 左对齐
+ 3.62 字符, 左对齐
带格式的: Quectel正文文
本样式
带格式的: (中文) 中文(简
体，中国), (其他) 英语(美
国)