Product Info

Smart Module Series
SC600Y&SC600T Hardware Design
SC600Y&SC600T_Hardware_Design 25 / 134
USB_SS_TX
_P
174 AO
USB 3.0 differential
transmit data (+)
USB_SS_TX
_M
175 AO
USB 3.0 differential
transmit data (-)
USBC_CC2 223 AI
USB Type-C control
configuration channel
2
USBC_CC1 224 AI
USB Type-C control
configuration channel
1
USB_SS_SEL 226 DO
USB Type-C switch
control
USB_OPT 217
Type-C/Micro USB
select control
If Micro USB is
intended to be used,
this pin should be
connected to ground
via a 1KΩ resistor;
If Type-C is intended to
be used, this pin
should be left open.
(U)SIM Interfaces
Pin Name Pin No. I/O Description DC Characteristics Comment
USIM1_DET 145 DI
(U)SIM1 card
hot-plug detection
V
IL
max=0.63V
V
IH
min=1.17V
Active low.
Require external
pull-up to 1.8V.
If unused, keep this
pin open.
Disabled by default
and can be enabled
through software
configuration.
USIM1_RST 144 DO (U)SIM1 card reset
V
OL
max=0.4V
V
OH
min=
0.8 × USIM1_VDD
USIM1_CLK 143 DO (U)SIM1 card clock
V
OL
max=0.4V
V
OH
min=
0.8 × USIM1_VDD
USIM1_DATA 142 IO (U)SIM1 card data
V
IL
max=
0.2 × USIM1_VDD
V
IH
min=
0.7 × USIM1_VDD
V
OL
max=0.4V