Product Info

Smart Module Series
SC600Y&SC600T Hardware Design
SC600Y&SC600T_Hardware_Design 22 / 134
Vnorm=3.8V current of 1A
approximately.
The value of capacitors
placed on this pin
should not exceed
120uF.
VRTC 16
PI/P
O
Power supply for
internal RTC circuit
V
O
max=3.2V
V
I
=2.0V~3.25V
LDO5_1P8 9 PO
1.8V output power
supply
Vnorm=1.8V
I
O
max=20mA
Power supply for
external GPIO’s pull up
circuits and level shift
circuit.
LDO10_2P8 11 PO
2.8V output power
supply
Vnorm=2.8V
I
O
max=150mA
Power supply for VDD
of sensors and TPs.
Add a 1.0uF~4.7uF
bypass capacitor if
used.
If unused, keep this pin
open.
LDO6_1P8 10 PO
1.8V output power
supply
Vnorm=1.8V
I
O
max=300mA
Power supply for I/O
VDD of cameras,
LCDs and sensors.
Add a 1.0uF~2.2uF
bypass capacitor if
used.
If unused, keep this pin
open.
LDO17_2P85 12 PO
2.85V output power
supply
Vnorm=2.85V
I
O
max=300mA
Power supply for
cameras and LCDs.
Add a 1.0uF~4.7uF
bypass capacitor if
used.
If unused, keep this pin
open.
LDO23_1P2 15 PO
1.2V output power
supply
Vnorm=1.2V
I
O
max=600mA
Power supply for
DVDD of front camera.
Add a 1.0uF~2.2uF
bypass capacitor if
used.
If unused, keep this pin
open.