Product Info

Smart Module Series
SC600Y&SC600T Hardware Design
SC600Y&SC600T_Hardware_Design 15 / 134
2-lane + 1-lane)
SC600Y
Up to 21MP with dual ISP
SC600T
Up to 24MP with dual ISP
Video Codec
SC600Y
Video encoding and decoding: up to 1080P @60fps
Wi-Fi Video: encoding up to 1080P @30fps; decoding up to 1080P @60fps
SC600T
Video encoding and decoding: up to 4K @30fps, up to 1080P @60fps
Wi-Fi Video: encoding up to 1080P @30fps; decoding up to 1080P @60fps
Audio Interfaces
Audio Input
Three analog microphone inputs, integrating internal bias voltage
Audio Output
Class AB stereo headphone output
Class AB earpiece differential output
Class D speaker differential amplifier output
Audio Codec
G711, QCELP, EVRC, EVRC-B, EVRC-WB, AMR-NB, AMR-WB, GSM-EFR,
GSM-FR, GSM-HR
USB Interface
Support with USB 3.0 or 2.0 specifications, with transmission rates up to
5Gbps on USB 3.0 and 480Mbps on USB 2.0
Support USB OTG
Used for AT command communication, data transmission, software debugging
and firmware upgrade
UART Interfaces
4 UART Interfaces: UART5, UART6, UART4 and UART2
 UART5 & UART6: 4-wire UART interface with RTS/CTS hardware flow
control, baud rate up to 4Mbps
 UART4: 2-wire UART interface
 UART2: 2-wire UART interface used for debugging
Vibrator drive interface Drive ERM vibrator
SD Card Interface
Support SD 3.0
Support SD card hot-plug
(U)SIM Interfaces
2 (U)SIM interfaces
Support USIM/SIM card: 1.8V/2.95V
Support Dual SIM Dual Standby (supported by default)
I2C Interfaces 5 I2C interfaces, used for peripherals such as TP, camera, sensor, etc.
I2S Interface Support for I2S peripherals
Flashlight Interfaces
2 high current Flash and torch LED driver
 Up to 0.75A each for two LEDs and 1.5A for one LED in Flash mode
 Up to 300mA each for two LEDs and 300mA for one LED in torch mode