Product Info

LPWA Module Series
BG95-M3 Mini PCIe Hardware Design
BG95-M3_Mini_PCIe_Hardware_Design 7 / 53
1 Introduction
This document defines Quectel BG95-M3 Mini PCIe module, and describes its air interfaces and
hardware interfaces which are connected with customers’ applications.
This document helps customers quickly understand the interface specifications, electrical characteristics,
mechanical specifications and other related information of the module. To facilitate application designs, it
also includes some reference designs for customers’ reference. The document, coupled with application
notes and user guides, makes it easy to design and set up mobile applications with BG95-M3 Mini PCIe.
1.2. FCC Certification Requirements.
According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a
mobile device.
And the following conditions must be met:
1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna
installation and operating configurations of this transmitter, including any applicable source-based time-
averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements
of 2.1091.
2. The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the user’s body
and must not transmit simultaneously with any other antenna or transmitter.
3.A label with the following statements must be attached to the host end product: This device contains
FCC ID: XMR201910BG96M3.
4.To comply with FCC regulations limiting both maximum RF output power and human exposure to RF
radiation, maximum antenna gain (including cable loss) must not exceed:
GSM850:8.571 dBi
GSM1900:10.030dBi
Catm LTE Band2/25:11.000dBi
Catm LTE Band4/66:8.000dBi
Catm LTE Band5/26:12.541dBi
Catm LTE Band12/85:11.798dBi
Catm LTE Band13:12.214dBi
Catm LTE Band14:12.272 dBi
NB LTE Band2/25:11.000dBi
NB LTE Band4/66:8.000dBi
NB LTE Band5/26:12.541dBi
NB LTE Band12/85:11.798dBi
NB LTE Band13:12.214dBi