Product Info

LPWA Module Series
BG95-M3 Mini PCIe Hardware Design
BG95-M3_Mini_PCIe_Hardware_Design 29 / 53
Table 14: Indications of Network Status (AT+QCFG="ledmode",1)
3.7.5. WAKE#
WAKE# is an open collector signal which is similar to RI, but a host pull-up resistor and
AT+QCFG="risignaltype","physical" command are required. When a URC returns, a 120 ms low level
pulse will be outputted. The state of WAKE# is shown as below.
Figure 12: WAKE# Behaviors
Always low Voice calling
Pin Status Description
Low Level (Light on) Registered on network successfully
High-impedance (Light off)
 No network coverage or not registered
 W_DISABLE# is at low level (airplane mode)
 AT+CFUN=0 or AT+CFUN=4