Product Info
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Concept
- 3 Application Interfaces
- 3.1. General Description
- 3.2. Pin Assignment
- 3.3. Pin Description
- 3.4. Power Supply
- 3.5. Turn on and off Scenarios
- 3.6. VRTC Interface
- 3.7. Power Output
- 3.8. Battery Charge and Management
- 3.9. USB Interfaces
- 3.10. UART Interfaces
- 3.11. (U)SIM Interfaces
- 3.12. SD Card Interface
- 3.13. GPIO Interfaces
- 3.14. I2C Interfaces
- 3.15. I2S Interfaces
- 3.16. SPI Interface
- 3.17. ADC Interfaces
- 3.18. LCM Interfaces
- 3.19. Touch Panel Interfaces
- 3.20. Camera Interfaces
- 3.21. Sensor Interfaces
- 3.22. Audio Interfaces
- 3.23. Emergency Download Interface
- 4 Wi-Fi and BT
- 5 GNSS
- 6 Antenna Interfaces
- 7 Electrical, Reliability and Radio Characteristics
- 8 Mechanical Dimensions
- 9 Storage, Manufacturing and Packaging
- 10 Appendix A References
- 11 Appendix B GPRS Coding Schemes
- 12 Appendix C GPRS Multi-slot Classes
- 13 Appendix D EDGE Modulation and Coding Schemes
- IC & FCC Requirement
Smart LTE Module Series
SC66 Hardware Design
SC66_Hardware_Design 80 / 139
The following is a reference circuit design for three-camera applications.
Rear camera connector
MCAM_PWDN
MCAM_MCLK
CAM_I2C_SDA0
CAM_I2C_SCL0_
CSI1_LN3_P
CSI1_LN3_N
CSI1_LN2_P
CSI1_LN2_N
CSI1_LN1_P
CSI1_LN1_N
CSI1_LN0_P
CSI1_LN0_N
SCAM_RST
SCAM
_ PWDN
SCAM
_MCLK
CSI2_CLK_P
CSI2_CLK_N
CSI2_LN0_P
CSI2_LN0_N
CSI0_LN1_P
CSI0_LN1_N
CSI0_LN0_P
CSI0_LN0_N
CSI1_CLK_P
CSI1_CLK_N
CSI0_CLK_P
CSI0_ CLK_N
AVDD
2.2K
2.2K
Front camera connector
1uF
4.7 uF
4.7uF
1uF
1u F
4.7uF
MCAM_ RST
DCAM_PWDN
DCAM_MCLK
DCAM_I2C_SDA1
DCAM_I2C_SCL1
DCAM_RST
Depth camera connector
LDO3B_1P8
EMI
EMI
EMI
EMI
EMI
EMI
EMI
EMI
DVDD_REAR
1uF
2.2K
2.2K
DVDD
EMI
EMI
4.7
1uF
uF
AVDD
DOVDD
LDO11A_1P8
DVDD_FRONT
Figure 29: Reference Circuit Design for Three-Camera Applications