Product Info

Smart LTE Module Series
SC66 Hardware Design
SC66_Hardware_Design 64 / 139
DATA0, DATA1, DATA2 and DATA3. CLK needs separate ground shielding.
Layout guidelines:
 Control impedance to 50Ω±10%, and ground shielding is required.
 The difference in trace lengths among the clock, data, and command signals should be less than 2
mm.
 The bus length should be less than 50mm.
 The spacing between signal lines should be 1.5 times the line width.
 The capacitive reactance of data signal line should be < 8 pF.
Table 19: SD Card Signal Trace Length Inside the Module
3.13. GPIO Interfaces
SC66 has abundant GPIO interfaces with power domain of 1.8V. The pin definition is listed below.
Table 20: Pin Definition of GPIO Interfaces
Pin No. Signal Length (mm)
70 SD_CLK 24.35
69 SD_CMD 24.30
68 SD_DATA0 24.30
67 SD_DATA1 24.30
66 SD_DATA2 24.25
65 SD_DATA3 24.30
Pin Name Pin No. GPIO Default Status Comment
GPIO_21 231 GPIO_21 B-PD:nppukp
1)
Wakeup
2)
GPIO_34 236 GPIO_34 B-PD:nppukp
GPIO_40 238 GPIO_40 B-PD:nppukp Wakeup