Product Info
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Concept
- 3 Application Interfaces
- 3.1. General Description
- 3.2. Pin Assignment
- 3.3. Pin Description
- 3.4. Power Supply
- 3.5. Turn on and off Scenarios
- 3.6. VRTC Interface
- 3.7. Power Output
- 3.8. Battery Charge and Management
- 3.9. USB Interfaces
- 3.10. UART Interfaces
- 3.11. (U)SIM Interfaces
- 3.12. SD Card Interface
- 3.13. GPIO Interfaces
- 3.14. I2C Interfaces
- 3.15. I2S Interfaces
- 3.16. SPI Interface
- 3.17. ADC Interfaces
- 3.18. LCM Interfaces
- 3.19. Touch Panel Interfaces
- 3.20. Camera Interfaces
- 3.21. Sensor Interfaces
- 3.22. Audio Interfaces
- 3.23. Emergency Download Interface
- 4 Wi-Fi and BT
- 5 GNSS
- 6 Antenna Interfaces
- 7 Electrical, Reliability and Radio Characteristics
- 8 Mechanical Dimensions
- 9 Storage, Manufacturing and Packaging
- 10 Appendix A References
- 11 Appendix B GPRS Coding Schemes
- 12 Appendix C GPRS Multi-slot Classes
- 13 Appendix D EDGE Modulation and Coding Schemes
- IC & FCC Requirement
Smart LTE Module Series
SC66 Hardware Design
SC66_Hardware_Design 18 / 139
Table 6: SC66-MW*(2 × 2 MIMO WIFI) Frequency Bands
1. “*” means under development.
2. SC66-A, SC66-J, SC66-E and SC66-MW support Wi-Fi MIMO function.
SC66 is an SMD type module which can be embedded into applications through its 324 pins (including
152 LCC pads and 172 LGA pads). With a compact profile of 43.0mm × 44.0mm × 2.85mm, SC66 can
meet almost all requirements for M2M applications such as smart metering, smart home, security, routers,
wireless POS, mobile computing devices, PDA phone, tablet PC and etc. Besides, SC66 supports AI
applications such as face recognition and vehicle recognition.
Type Frequency Bands
LTE-FDD /
LTE-TDD /
WCDMA /
TD-SCDMA /
CDMA /
GSM /
Wi-Fi 802.11a/b/g/n/ac 2402MHz~2482MHz; 5180MHz~5825MHz
BT 5.0 2402MHz~2480MHz
GNSS /
NOTES