Product Info
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Concept
- 3 Application Interfaces
- 3.1. General Description
- 3.2. Pin Assignment
- 3.3. Pin Description
- 3.4. Power Supply
- 3.5. Turn on and off Scenarios
- 3.6. VRTC Interface
- 3.7. Power Output
- 3.8. Battery Charge and Management
- 3.9. USB Interfaces
- 3.10. UART Interfaces
- 3.11. (U)SIM Interfaces
- 3.12. SD Card Interface
- 3.13. GPIO Interfaces
- 3.14. I2C Interfaces
- 3.15. I2S Interfaces
- 3.16. SPI Interface
- 3.17. ADC Interfaces
- 3.18. LCM Interfaces
- 3.19. Touch Panel Interfaces
- 3.20. Camera Interfaces
- 3.21. Sensor Interfaces
- 3.22. Audio Interfaces
- 3.23. Emergency Download Interface
- 4 Wi-Fi and BT
- 5 GNSS
- 6 Antenna Interfaces
- 7 Electrical, Reliability and Radio Characteristics
- 8 Mechanical Dimensions
- 9 Storage, Manufacturing and Packaging
- 10 Appendix A References
- 11 Appendix B GPRS Coding Schemes
- 12 Appendix C GPRS Multi-slot Classes
- 13 Appendix D EDGE Modulation and Coding Schemes
- IC & FCC Requirement
Smart LTE Module Series
SC66 Hardware Design
SC66_Hardware_Design 135 / 139
9.3. Packaging
SC66 is packaged in tape and reel carriers. Each reel is 330mm in diameter and contains 200 modules.
The following figures show the package details, measured in mm.
Figure 54: Tape Dimensions
Reflow Zone
Max slope 2 to 3°C/sec
Reflow time (D: over 220°C) 40 to 60 sec
Max temperature 238°C ~ 245°C
Cooling down slope 1 to 4°C/sec
Reflow Cycle
Max reflow cycle 1