Product Info
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Concept
- 3 Application Interfaces
- 3.1. General Description
- 3.2. Pin Assignment
- 3.3. Pin Description
- 3.4. Operating Modes
- 3.5. Power Saving
- 3.6. Power Supply
- 3.7. Power-on/off Scenarios
- 3.8. Reset the Module
- 3.9. (U)SIM Interfaces
- 3.10. USB Interface
- 3.11. UART Interfaces
- 3.12. PCM and I2C Interfaces
- 3.13. SPI Interface
- 3.14. Network Status Indication
- 3.15. STATUS
- 3.16. ADC Interface
- 3.17. Behaviors of RI
- 3.18. USB_BOOT Interface
- 4 GNSS Receiver
- 5 Antenna Interfaces
- 6 Electrical, Reliability and Radio Characteristics
- 7 Mechanical Dimensions
- 8 Storage, Manufacturing and Packaging
- 9 Appendix A References
- 10 Appendix B GPRS Coding Schemes
- 11 Appendix C GPRS Multi-slot Classes
- 12 Appendix D EDGE Modulation and Coding Schemes
LTE Standard Module Series
EG91 Hardware Design
EG91_Hardware_Design 15 / 93
Protocol: NMEA 0183
AT Commands
Compliant with 3GPP TS 27.007,
27.005 and Quectel enhanced AT
commands
Network Indication NETLIGHT pin for network activity status indication
Antenna Interfaces
Including main antenna interface (ANT_MAIN), Rx-diversity antenna
(ANT_DIV) interface and GNSS antenna interface (ANT_GNSS)
1)
Physical Characteristics
Size: (29.0±0.15)mm × (25.0±0.15)mm × (2.3±0.2)mm
Package: LGA
Weight: approx. 3.8g
Temperature Range
Operation temperature range: -35°C ~ +75°C
2)
Extended temperature range: -40°C ~ +85°C
3)
Storage temperature range: -40°C ~ +90°C
Firmware Upgrade USB interface or DFOTA*
RoHS All hardware components are fully compliant with EU RoHS directive
1.
1)
GNSS antenna interface is only supported on EG91-NA/-NS/-VX/-EX.
2.
2)
Within operation temperature range, the module is 3GPP compliant.
3.
3)
Within extended temperature range, the module remains the ability to establish and maintain a
voice, SMS, data transmission, emergency call, etc. There is no unrecoverable malfunction. There
are also no effects on radio spectrum and no harm to radio network. Only one or more parameters
like P
out
might reduce in their value and exceed the specified tolerances. When the temperature
returns to normal operation temperature levels, the module will meet 3GPP specifications again.
4. “*” means under development.
2.3. Functional Diagram
The following figure shows a block diagram of EG91 and illustrates the major functional parts.
Power management
Baseband
DDR+NAND flash
Radio frequency
Peripheral interfaces
NOTES










