Product Info

Automotive Module Series
AG35 Hardware Design
AG35_Hardware_Design 20 / 129
Support master and slave modes, but must be the master in long frame
synchronization
SGMII Interface (Optional)
Support 10/100/1000Mbps
WLAN Interface
Compliant with 802.11, 4-bit, 1.8V WLAN interface
SDIO Interfaces
SDIO1:
Compliant with SD 3.0 protocol
Used for WLAN function
SDIO2:
Compliant with SD 3.0 protocol
USB Interface
Compliant with USB 2.0 specification (slave only), and the data transfer
rate can reach up to 480Mbps
Used for AT command communication, data transmission, GNSS NMEA
output, software debugging and firmware upgrade
Support USB serial driver under Windows 7/8/8.1/10, Windows CE
5.0/6.0/7.0*, Linux 2.6/3.x/4.1~4.14, Android 4.x/5.x/6.x/7.x/8.x/9.x
HSIC Interface*
High-speed inter-chip USB electrical specification compliant
UART Interfaces
Main UART:
Used for AT command communication and data transmission
Baud rate reach up to 921600bps, 115200bps by default
Support RTS and CTS hardware flow control
UART2:
Used for BT function*
Baud rate reach up to 921600bps, 115200bps by default
Support RTS and CTS hardware flow control
Debug UART:
Used for Linux console and log output
115200bps baud rate
Rx-diversity
Support LTE/WCDMA Rx-diversity
GNSS Features
Gen8C-Lite of Qualcomm
Protocol: NMEA 0183
Data update rate: 1Hz by default and maximally up to 10Hz
AT Commands
3GPP TS 27.007/3GPP TS 27.005 AT commands and Quectel enhanced
AT commands
Network Indication
Two pins including NET_MODE and NET_STATUS to indicate network
connectivity status
Antenna Interface
Including main antenna interface (ANT_MAIN), Rx-diversity antenna
interface (ANT_DIV) and GNSS antenna interface (ANT_GNSS)
Physical Characteristics
Size: (33.0±0.15)mm × (37.5±0.15)mm × (3.0±0.2)mm
Weight: Approx. 8.1g
Temperature Range
Operation temperature range: -35°C ~ +75°C
1)