Product Info

LTE Module Series
BG96 Hardware Design
BG96_Hardware_Design 2 / 81
About the Document
History
Revision Date Author Description
1.0 2017-08-04
Lyndon LIU/
Daryl DU
Initial
1.1 2017-08-31 Daryl DU
1. Modified GSM features in Table 2.
2. Added a note for e-I-DRX in Chapter 3.3.
3. Elaborated the description of e-I-DRX in Chapter 3.4.3.
4. Updated RF receiving sensitivity in Chapter 6.6.
1.2 2017-12-22
Lyndon LIU/
Daryl DU
1. Added the storage temperature of the module in Table
2 and Chapter 6.3.
2. Updated transmitting power values in Table 2.
3. Added the description of sleep mode in Table 5 and
Chapter 3.4.4.
4. Added the description of ADC interfaces in Chapter
3.16.
5. Updated the GNSS performance in Table 21.
6. Updated the peak supply current values in Table 28.
7. Updated the current consumption valuesin Chapter
6.4.
8. Updated RF output power values inTable 34.
9. Updated LTE Cat NB1 RF receiving sensitivityvalues
(without repetitions) in Table 35.
10. Updated the recommended footprintin Chapter 7.2.
1.3 2018-07-12
Lyndon LIU/
Daryl DU/
Hyman
DING
1. Updated the timing of turning on module in Figure 8.
2. Updated theUSB interfacereference design(Figure 15).
3. Added the description of GPIO interfaces (Chapter
3.17).
4. Updated GNSS performance parameters in Table 25.
5. Updated the GNSS antenna interface reference design
(Figure 27).