Product Info

Smart Module Series
SC606T Series Hardware Design
SC606T_Series_Hardware_Design 19 / 116
SMS cell broadcast
LCM Interfaces
Support two groups of 4-lane MIPI_DSI
Support dual LCDs
Support WUXGA up to 1200 (RGB) × 1920 @ 60 fps
Camera Interfaces
Support three groups of 4-lane MIPI_CSI, up to 2.1 Gbps per lane
Support 3 cameras (4-lane + 4-lane + 4-lane) or 4 cameras (4-lane + 4-lane +
2-lane + 1-lane)
Up to 24 MP with dual ISP
Video Codec
Video encoding and decoding: up to 4 K @ 30 fps, up to 1080 P @ 60 fps
Wi-Fi Video: encoding up to 1080 P @ 30 fps; decoding up to 1080 P @ 60 fps
Audio Interfaces
Audio Input
Three analog microphone inputs
Audio Output
Class AB stereo headphone output
Class AB earpiece differential output
Class D speaker differential amplifier output
Audio Codec
Support G711, QCELP, EVRC, EVRC-B, EVRC-WB, AMR-NB, AMR-WB,
GSM-EFR, GSM-FR, GSM-HR
USB Interface
Support USB 3.0 or 2.0, with transmission rates up to 5 Gbps on USB 3.0 and
480 Mbps on USB 2.0
Support USB OTG
Used for AT command communication, data transmission, software debugging
and firmware upgrade
UART Interfaces
Three UART Interfaces: UART5, UART4, and UART2
⚫ UART5: 4-wire UART interface with hardware flow control (RTS/CTS),
baud rate up to 4 Mbps
⚫ UART4: 2-wire UART interface
⚫ UART2: 2-wire UART interface used for debugging
SD Card Interface
Support SD 3.0
Support SD card hot-plug
(U)SIM Interfaces
Two (U)SIM interfaces
Support USIM/SIM card: 1.8/2.95 V
Support Dual SIM Dual Standby by default
I2C Interfaces
Five I2C interfaces, used for peripherals such as TP, camera and sensor
ADC Interface
One general-purpose ADC interface
Support up to 15-bit ADC resolution
SPI Interfaces
Two SPI interfaces, only support master mode
⚫ One SPI interface used for peripheral device
⚫ One SPI interface used for sensor application, such as fingerprint sensor
Real Time Clock
Supported