Product Info

LPWA Module Series
BG95 Series Hardware Design
BG95_Series_Hardware_Design 10 / 106
1 Introduction
This document defines BG95 series module and describes its air interface and hardware interfaces which
are connected with your applications.
This document helps you quickly understand the interface specifications, electrical and mechanical
details, as well as other related information of BG95 series module. To facilitate application designs, it
also includes some reference designs for your reference. The document, coupled with application notes
and user guides, makes it easy to design and set up mobile applications with BG95 series module.
FCC Certification Requirements.
According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a
mobile device.
And the following conditions must be met:
1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna
installation and operating configurations of this transmitter, including any applicable source-based time
averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements
of 2.1091.
2. The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the users
body and must not transmit simultaneously with any other antenna or transmitter.
3. A label with the following statements must be attached to the host end product: This device contains
FCC ID: XMR202010BG95M3.
4.To comply with FCC regulations limiting both maximum RF output power and human exposure to RF
radiation, maximum antenna gain (including cable loss) must not exceed:
GSM850:8.571 dBi
GSM1900:10.030dBi
Catm LTE Band2/25:11.000dBi
Catm LTE Band4/66:8.000dBi
Catm LTE Band5/26:12.541dBi
Catm LTE Band12/85:11.798dBi
Catm LTE Band13:12.214dBi
Catm LTE Band14:12.272 dBi
NB LTE Band2/25:11.000dBi
NB LTE Band4/66:8.000dBi
NB LTE Band5/26:12.541dBi
NB LTE Band12/85:11.798dBi
NB LTE Band13:12.214dBi
NB LTE Band14:12.272 dBi
NB LTE Band71:11.687 dBi