User's Manual

FC20-N Series Hardware Design
FC20-N_Series_Hardware_Design Confidential / Released 10 /
47
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
2.3. Key Features
The following table describes the detailed features of FC20-N module.
Table 2: Key Features
Features
Implementation
Power Supply
Main supply voltage: 3.3V, 400mA
IO supply voltage: 1.8V
Transmission Data
FC20-N: 802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps
Transmitting Power
FC20-N: 802.11b/11Mbps: 17dBm
802.11g/54Mbps: 15dBm
802.11n/HT20 MCS7: 14dBm
802.11n/HT40 MCS7: 13dBm
Protocol Features
FC20-N: IEEE 802.11b/g/n
Operator Mode
AP
STA*
Modulation
802.11b: DSSS
802.11g/n20/n40: OFDM
WLAN Interface
SDIO 3.0
Antenna Interface
Wi-Fi antenna, 50Ω
Physical Characteristics
Size: 16.6±0.15 × 13±0.15 × 2.1±0.2mm
Interface: LCC+LGA
Weight: about 0.81g
Temperature Range
Operating temperature range: -35°C~+75°C
1)
Extended temperature range : -40°C~+85°C
2)