User's Manual

FC20-N Series Hardware Design

FC20-N_Series_Hardware_Design Confidential / Released 9 /

2 Product Concept

2.1. General Description

FC20-N module is a low-power and low-cost wireless module based on QCA9377-3.

FC20-N module only supports 1×1 IEEE 802.11 b/g/n WLAN standards.

2.2. Directives and Standards

The FC20-N module is designed to comply with the FCC statements. FCC ID: XMR201703FC20N

The Host system using FC20-N should have label “contains FCC ID: XMR201701FC20N

2.2.1. FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

2.2.2. FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and

your body as well as kept minimum 20cm from radio antenna depending on the Mobile status of this

module usage. This module should NOT be installed and operating simultaneously with other radio. The

manual of the host system, which uses FC20-N, must include RF exposure warning statement to advice

user should keep minimum 20cm from the radio antenna of FC20-N module depending on the Mobile

status. Note: If a portable device (such as PDA) uses FC20-N module, the device needs to do permissive

change and SAR testing.

Any Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful