User's Manual

Wi-Fi&BT Module Series
FC20 Series Hardware Design
FC20_Series_Hardware_Design Confidential / Released 30 / 47
3.9.5. Install the Antenna with RF Connector
The following figure is the antenna installation with RF connector provided by HIROSE. The
recommended RF connector is UF.L-R-SMT.
Figure 12: Dimensions of the UF.L-R-SMT Connector (Unit: mm)
Customers can use U.FL-LP serial connector listed in the following figure to match the UF.L-R-SMT.
Figure 13: Mechanicals of UF.L-LP Connectors (Unit: mm)