User's Manual

GSM/GPRS/GNSS Module Series
MC20 Hardware Design
MC20_Hardware_Design Confidential / Released 13 / 95
The module fully complies with the RoHS directive of the European Union.
2.2. Directives and Standards
The MC20module is designed to comply with the FCC statements. FCC ID: XMR201609MC20
The Host system using MC20 should have label “contains FCC ID: XMR201609MC20”.
2.2.1. 2.2.1. FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
2.2.2. FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body as well as kept minimum 20cm from radio antenna depending on the Mobile status of this
module usage. This module should NOT be installed and operating simultaneously with other radio. The
manual of the host system, which uses MC20, must include RF exposure warning statement to advice
user should keep minimum 20cm from the radio antenna of MC20 module depending on the Mobile status.
Note: If a portable device (such as PDA) uses MC20 module, the device needs to do permissive change
and SAR testing.
The following list indicates the performance of antenna gain in certificate testing.
Part
Number
Frequency Range (MHz)
Peak Gain
(XZ-V)
Average
Gain(XZ-V)
VSWR Impedance
3R007
GSM850:824～894MHz
PCS1900: 1850～1990MHz
1 dBi typ. 1 dBi typ. 2 max 50Ω
2.3. Key Features
The following table describes the detailed features of MC20 module.
Table 1: Key Features (GMS/GPRS Part of MC20)
Features Implementation