User's Manual

UMTS/HSPA Module Series
UC20 User Manual
UC20_Hardware_Design Confidential / Released 68 / 84
GNSS tracking current is tested in the following conditions:
 For Cold Start, 10 minutes after First Fix.
 For Hot Start, 15 seconds after First Fix.
6.5. RF Output Power
The following table shows the RF output power of UC20 module.
Table 32: Conducted RF Output Power
Frequency
Max.
Min.
GSM850
33dBm±2dB
5dBm±5dB
EGSM900
33dBm±2dB
5dBm±5dB
DCS1800
30dBm±2dB
0dBm±5dB
PCS1900
30dBm±2dB
0dBm±5dB
GSM850 (8-PSK)
27dBm±3dB
5dBm±5dB
EGSM900 (8-PSK)
27dBm±3dB
5dBm±5dB
DCS1800 (8-PSK)
26dBm±3dB
0dBm±5dB
PCS1900 (8-PSK)
26dBm±3dB
0dBm±5dB
UMTS 2100
24dBm+1/-3dB
<-50dBm
UMTS 1900
24dBm+1/-3dB
<-50dBm
UMTS 900
24dBm+1/-3dB
<-50dBm
UMTS 850
24dBm+1/-3dB
<-50dBm
UMTS 800
24dBm+1/-3dB
<-50dBm
In GPRS 4 slots TX mode, the max output power is reduced by 2.5dB. This design conforms to the GSM
specification as described in chapter 13.16 of 3GPP TS 51.010-1.
NOTE
NOTE