User's Manual

UMTS/HSPA Module Series

UC20 User Manual

UC20_Hardware_Design Confidential / Released 13 / 84

2.2. Directives and Standards

The UC20 module is designed to comply with the FCC statements. FCC ID: XMR-201510UC20

The Host system using UC20, should have label indicated FCC ID: XMR-201510UC20.

2.2.1. FCC Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:

a) This device may not cause harmful interference.

b) This device must accept any interference received, including interference that may cause undesired

operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

2.2.2. FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and

your body as well as kept minimum 20cm from radio antenna depending on the Mobile status of this

module usage. This module should NOT be installed and operating simultaneously with other radio.

The manual of the host system, which uses UC20, must include RF exposure warning statement to

advice user should keep minimum 20cm from the radio antenna of UC20 module depending on the

Mobile status.

Note: If a portable device (such as PDA) uses UC20 module, the device needs to do permissive change

and SAR testing.

The following list of antenna is indicating the maximum permissible antenna gain.

Part

Number

Frequency

Range (MHz)

Peak

Gain

(XZ-V)

Average Gain

(XZ-V)

VSWR

Impedance

3R007A

UMTS2100: 1922~2168MHz

UMTS1900:1852~1992MHz

UMTS900: 882~958MHz

UMTS850:822~896MHz

UMTS800:832~887MHz

1 dBi typ.

3 max

50Ω