User's Manual
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Concept
- 3 Application Interface
- 3.1. General Description
- 3.2. Pin Assignment
- 3.3. Pin Description
- 3.4. Operating Modes
- 3.5. Power Saving
- 3.6. Power Supply
- 3.7. Turn on and off Scenarios
- 3.8. Reset the Module
- 3.9. RTC Interface
- 3.10. UART Interface
- 3.11. USIM Card Interface
- 3.12. USB Interface
- 3.13. PCM and I2C Interface
- 3.14. Network Status Indication
- 3.15. Operating Status Indication
- 4 Antenna Interface
- 5 Electrical, Reliability and Radio Characteristics
- 6 Mechanical Dimensions
- 7 Storage and Manufacturing
- 8 Appendix A Reference
- 9 Appendix B GPRS Coding Scheme
- 10 Appendix C GPRS Multi-slot Class
- 11 Appendix D EDGE Modulation and Coding Scheme
UMTS/HSPA Module Series
UG96 Hardware Design
UG96_Hardware_Design Confidential / Released 70 / 75
8 Appendix A Reference
Table 29: Related Documents
SN
Document Name
Remark
[1]
Quectel_WCDMA_UGxx_AT_Commands_Manual
UGxx AT Commands Manual
[2]
Quectel_UMTS<E_EVB_User_Guide
UMTS<E EVB User Guide
[3]
Quectel_UG96_Reference_Design
UG96 Reference Design
[4]
Quectel_UG96&UG95&M95 R2.0_Reference_Design
UG96, UG95 and M95 R2.0
Compatible Reference Design
[5]
Quectel_UG96&UG95&M95 R2.0_Compatible_
Design
UG96, UG95 and M95 R2.0
Compatibility Design Specification
[6]
Quectel_Module_Secondary_SMT_User_Guide
Module Secondary SMT User Guide
Table 30: Terms and Abbreviations
Abbreviation
Description
AMR
Adaptive Multi-rate
ARP
Antenna Reference Point
bps
Bits Per Second
CHAP
Challenge Handshake Authentication Protocol
CS
Coding Scheme
CSD
Circuit Switched Data
CTS
Clear To Send
DRX
Discontinuous Reception
DCE
Data Communications Equipment (typically module)
DTE
Data Terminal Equipment (typically computer, external controller)