User's Manual

UMTS/HSPA Module Series
UG96 Hardware Design
UG96_Hardware_Design Confidential / Released 13 / 75
 Baud rate 300 to 921600bps
 Default autobauding 4800 to 115200bps
 Used for AT command, data transmission or firmware upgrade
 Multiplexing function
USB Interface
Compliant with USB 1.1/2.0 specification (slave only), the data transfer
rate can reach up to 480Mbps
Used for AT command communication, data transmission, software
debug and firmware upgrade
USB Driver: Support Windows XP, Windows Vista, Windows 7,
Windows 8, Windows CE5.0/6.0*, Linux, Android
AT Commands
Compliant with 3GPP TS 27.007, 27.005 and Quectel enhanced AT
commands
Real Time Clock
Implemented
Network Indication
One pin NETLIGHT to indicate network connectivity status
Antenna Interface
GSM/UMTS antenna, 50Ω
Physical Characteristics
Size: 22.5±0.15 × 26.5±0.15 × 2.2±0.2mm
Interface: LGA
Weight: 3.1g
Temperature Range
Normal operation: -35°C ~ +80°C
Restricted operation: -40°C ~ -35°C and +80°C ~ +85°C
1)
Storage temperature: -45°C ~ +90°C
Firmware Upgrade
USB interface or UART interface
RoHS
All hardware components are fully compliant with EU RoHS directive
1.
1)
Means when the module works within this temperature range, RF performance might degrade. For
example, the frequency error or the phase error would increase.
2. * means this feature is under development.
2.4. Functional Diagram
The following figure shows a block diagram of UG96 and illustrates the major functional parts.
 RF transceiver
 Baseband
NOTES