User's Manual

UMTS/HSPA Module Series
UG96 Hardware Design
UG96_Hardware_Design Confidential / Released 12 / 75
Power Supply
Supply voltage: 3.3V~4.3V
Typical supply voltage: 3.8V
Frequency Bands
GSM 4-band: 850/900/1800/1900MHz
UMTS 5-band: 800/850/900/1900/2100MHz
Transmission Data
HSDPA category 8: Max 7.2Mbps
HSUPA category 6: Max 5.76Mbps
UMTS: Max 384kbps (DL)/Max 384kbps (UL)
EDGE: Max 236.8kbps (DL)/Max 236.8kbps (UL)
GPRS: Max 85.6kbps (DL)/Max 85.6kbps (UL)
CSD: 14.4kbps
HSPA/UMTS Features
Compliant with 3GPP Release 7
WCDMA data rate is corresponded with 3GPP R99/R4
384kbps on downlink and 384kbps on uplink
Support both QPSK and 16-QAM modulations
GSM/GPRS/EDGE
Data Features
GPRS:
Support GPRS multi-slot class 12
Coding scheme: CS-1, CS-2, CS-3 and CS-4
Maximum of four Rx time slots per frame
EDGE:
Support EDGE multi-slot class 12
Support GMSK and 8-PSK for different MCS (Modulation and Coding
scheme)
Downlink coding schemes: CS 1-4 and MCS 1-9
Uplink coding schemes: CS 1-4 and MCS 1-9
CSD:
CSD transmission rates: 14.4kbps non-transparent
Support Unstructured Supplementary Services Data (USSD)
Internet Protocol Features
Support TCP/UDP/PPP protocols
Support the protocols PAP (Password Authentication Protocol) and
CHAP (Challenge Handshake Authentication Protocol) usually used
for PPP connections
SMS
Text and PDU mode
Point to point MO and MT
SMS cell broadcast
SMS storage: SIM card by default
USIM Interface
Support USIM card: 1.8V, 3.0V
Support USIM and SIM
PCM Interface
Used for audio function with external codec
Supports 8, 16, 32 bit mode with short frame synchronization
Support master mode
UART Interface
Support one UART interface
 7-wire on UART interface, without DSR
 Support RTS and CTS hardware flow control