User's Manual

UMTS/HSPA Module Series

UG95 Hardware Design

UG95_Hardware_Design Confidential / Released 10 / 67

The Host system using UG95 should have label “contains FCC ID: XMR201408UG95”.

2.2.1. FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

2.2.2. FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and

your body as well as kept minimum 20cm from radio antenna depending on the Mobile status of this

module usage. This module should NOT be installed and operating simultaneously with other radio.

The manual of the host system, which uses UG95, must include RF exposure warning statement to

advice user should keep minimum 20cm from the radio antenna of UG95 module depending on the

Mobile status.

Note: If a portable device (such as PDA) uses UG95 module, the device needs to do permissive change

and SAR testing.

The following list indicates the performance of antenna gain in certificate testing.

Part

Number

Frequency Range (MHz)

Peak Gain

(XZ-V)

Average Gain

(XZ-V)

VSWR

Impedance

3R007

UMTS850: 824~894MHz

UMTS1900: 1850~1990MHz

1 dBi typ.

2 max

50Ω

2.3. Key Features

The following table describes the detailed features of UG95 module.

Table 2: UG95 Key Features

Feature

Details

Power Supply

Supply voltage: 3.4V~4.3V.

Typical supply voltage: 3.8V.

Frequency Bands

UG95

UMTS Dual-band: 850/1900MHz.

Transmission Data

HSPA R6: Max 7.2Mbps (DL)/Max 5.76Mbps (UL).

UMTS R4: Max 384kbps (DL)/Max 384kbps (UL).