User Manual

UMTS/HSDPA Module Series
UC15 Mini PCIe Hardware Design
UC15_Mini_PCIe_Hardware_Design Confidential / Released 10 / 40
2.3. Directives and Standards
The UC15 Mini PCIe module is designed to comply with the FCC statements.FCC ID:XMR201404UC15M
If the FCC ID of the module cannot be seen by the user in the final installation, the host device must show
the statement: “Contains FCC ID: XMR201404UC15M” in a visible and permanent location”
2.3.1. FCC Statement
1. This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
a) This device may not cause harmful interference.
b) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could avoid
the user’s authority to operate the equipment.
2.3.2. FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body as well as kept minimum 20cm from radio antenna depending on the Mobile status of this
module usage. This module should NOT be installed and operating simultaneously with other radio.
The manual of the host system, which uses UC15 Mini PCIe, must include RF exposure warning
statement to advice user should keep minimum 20cm from the radio antenna of UC15 Mini PCIe module
depending on the mobile status.
Note: If a portable device (such as PDA) uses UC15 Mini PCIe module, the device needs to do
permissive change and SAR testing.
The following list of antenna is indicating the maximum permissible antenna gain.
Part Number
Frequency
Range (MHz)
Peak Gain
(XZ-V)
Average Gain
(XZ-V)
VSWR Impedance
3R007A
GSM850:824~849
PCS1900:1850~1990
UMTS1900:1850~1990
UMTS850:824-894
1 dBi typ. 1 dBi typ. 3 max 50Ω
2.4. Key Features
The following table describes the detailed features of UC15 Mini PCIe module.