User's Manual

Table Of Contents
M35 Hardware Design
M35_HD_V1.0 - 9 -
1. Introduction
This document defines Module M35 and describes its hardware interface which are connected
with the customer application and the air interface.
This document can help customers quickly understand the interface specifications, electrical and
mechanical details of M35. Associated with application notes and user guide, customers can use
M35 to design and set up mobile applications easily.
1.1. Related documents
Table 1: Related documents
SN
Document name
Remark
[1]
M35_ATC
AT commands set
[2]
ITU-T Draft new
recommendation V.25ter
Serial asynchronous automatic dialing and control
[3]
GSM 07.07
Digital cellular telecommunications (Phase 2+); AT
command set for GSM Mobile Equipment (ME)
[4]
GSM 07.10
Support GSM 07.10 multiplexing protocol
[5]
GSM 07.05
Digital cellular telecommunications (Phase 2+); Use of
Data Terminal Equipment Data Circuit terminating
Equipment (DTE DCE) interface for Short Message
Service (SMS) and Cell Broadcast Service (CBS)
[6]
GSM 11.14
Digital cellular telecommunications (Phase 2+);
Specification of the SIM Application Toolkit for the
Subscriber Identity module Mobile Equipment (SIM
ME) interface
[7]
GSM 11.11
Digital cellular telecommunications (Phase 2+);
Specification of the Subscriber Identity module Mobile
Equipment (SIM ME) interface
[8]
GSM 03.38
Digital cellular telecommunications (Phase 2+);
Alphabets and language-specific information
[9]
GSM 11.10
Digital cellular telecommunications (Phase 2); Mobile
Station (MS) conformance specification; Part 1:
Conformance specification
[10]
GSM_UART_AN
UART port application notes
[11]
GSM_FW_Upgrade_Tool_
Lite_GS2_UDG
GSM Firmware upgrade tool lite GS2 user guide
[12]
M35_EVB_UGD
M35 EVB user guide
Quectel
Confidential