User's Manual

Note: The network operators must support the “Broadcast
Message” function for it to be available.
4.8 User Profiles Your mobile phone provides many
different user profiles for you to set your mobile phone’s
ring tone, according to case and environments. In the
main menu interface, press the navigation keys to select
“User Profiles”. Press the left soft key to enter the
“User Profiles” main menu where you will be able to
see the options: “General”, “Meeting”, “Outdoor”,
“Indoor”, “Headset”and “Bluetooth”.
General for use under general circumstances.
Meeting for use in meetings. This requires presetting (for
example, Alert Type set to the Vibration
Only).
Outdoor for use in outdoor activities. This requires
presetting (for example, you can set the
volume of the receiver and ring tone
higher).
Indoor for use in indoor activities. This requires presetting.
Headset for use in headset activities, this mode will
activate when earphone insert. This requires
presetting (for example, you can set the
volume of the receiver and ring tone lower).
Bluetooth to connect the bluetooth earphone and
succeed online. Note: These seven
profiles have already been set and the
default profile is “General” when the
mobile phone leaves the factory. On
standby, hold down press # key to
quickly turn silence on or off. Press the
up/down keys to select the needful profile,
then press the left soft key “Option”:
Activate: to activate selecting profile.